12
800-810-WIRE (9473) • www.sargentlock.com • A7113E
12/15/07 © SARGENT Manufacturing Company 2005, 2007. All rights reserved.
Keypad 10 Line Lock
8/14/08 Copyright © 2005, 2007,2008, SARGENT Manufacturing, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is prohibited.
Programming Instructions
The 10 Line Keypad Lock can support 100 users. Each user is assigned a User Number in addition to
the code used for entry.
6
Example:
USER USER USER CODE*
TYPE NUMBER (2-6 DIGITS)
Master 01 1 2 3 4
Supervisor 03 3 0 3 0 3 0
Standard 04-97 2 6 5
Special Factory 98
10 Sec. Time Preset 99 1 3 6 8
How to Change Cylinder (if required)
1. With outside lever in hand-
use standard pliers; pull out
cylinder retainer
2. Remove key and cylinder from lever
3. Insert new cylinder
4. Secure by pressing cylinder retainer
flush with shelf*
* NOT SHOWN
Washers
(only 30- prefix)
C
ylinder
r
etainer
Cylinder
O
utside
lever
K
ey
C
ylinder
s
pacer
To Next Page
Loading...
