Assa Abloy Norton PR1601 User Manual

Copyright © 2016 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9316-2537-020 Rev 1
1
ASSA ABLOY
Installation Instructions
An incorrectly installed or improperly
adjusted door closer can cause
property damage or personal injury.
These instructions should be followed
to avoid the possibility of
misapplication or misadjustment.
CAUTION
CAUTION
Right Hand Door – RH
Left Hand Reverse – LHR
Left Hand Door – LH
Right Hand Reverse – RHR
Right Hand Door – RH
Left Hand Reverse – LHR
Left Hand Door – LH
Right Hand Reverse – RHR
Right Hand Door – RH
Left Hand Reverse – LHR
Left Hand Door – LH
Right Hand Reverse – RHR
Hinge Edge
of Door
Hinge Edge
of Door
Hinge Edge
of Door
Hinge Edge
of Door
Hinge
Edge
of Door
Hinge
Edge
of Door
Model Numbers Included:
Parallel Rigid Arm Door Closers (PR)
CloserPlus Door Closers (CLP)
Additional Closer Options:
- “H” indicates Hold-Open function for “PR” arms. Arms are handed
- “T” indicates Thumbturn actuated Hold-Open control for “CLP” arms.
Optional Accessories:
- 1688 Drop plate
- 2019L, 6890, 6891 Soffit Plate Accessories.
NOTE: For special applications a separate door and frame preparation template is packed with these instructions. In those
cases, use this instruction sheet for installation sequence and closer adjustments only.
Standard Frame Installation
Closer mounts on opposite to hinge (push) side of door. Parallel Rigid Non Hold Open arm illustrated.
See Pages 3 and 4
Narrow Frame Installation
Closer mounts on opposite to hinge (push) side of door. CloserPlus arm illustrated.
6890 and 6891 accessories required for this application (supplied separately).
See Pages 3 and 4
Flush Partition Installation
Closer mounts on opposite to hinge (push) side of door. CloserPlus arm with Thumbturn Hold Open illustrated.
2019L accessory required for this application (supplied separately).
See Pages 3 and 4
Multi Size Closer
PR1601
CLP1601
Sized Closer
PR160XBC
CLP160XBC
Note: “X” is Sized Closer number
designates power size of
closer 3 or 4.
ASSA ABLOY

Assa Abloy Norton PR1601 Specifications

General

Series	PR1600
Brand	Norton
Latch Speed	Adjustable
Sweep Speed	Adjustable
Backcheck	Standard
Delayed Action	Adjustable

Summary

Installation Instructions Overview

Parallel Rigid & CloserPlus Door Closers

Covers PR and CLP closer series installation instructions and model numbers.

Additional Closer Options

Explains optional functions, like hold-open, and accessories for closers.

Frame Installation Types

Details installation for standard, narrow, and flush partition frames.

Components and Preparation

Closer Components Identification

Identifies and illustrates the various parts of the door closer unit.

Arm Options and Covers

Details available arm types, cover options, and accessories for installation.

Fastener Preparation Guide

Provides guidance on selecting and preparing fasteners for door closer installation.

Installation Procedures and Dimensions

Door and Frame Preparation Steps

Guides on preparing doors and frames for closer mounting.

Power Adjustment Chart and Settings

Details how to set closer power based on door size and turns.

Installation Dimensions Chart

Provides crucial dimensional data for various installation types.

Arm Mounting and Typical Installation

Illustrates how to mount the arm and shows typical closer installation.

Dimensional Drawings for Frame Types

Standard and Stop Frame Dimensions

Detailed drawings for standard, wide, narrow, and blade stop frames.

Narrow and Rabetted Frame Dimensions

Drawings for narrow and single rabetted frames, including blade stop mounts.

Flush Partition Frame Dimensions

Dimensional drawings specific to flush partition door installations.

Accessory Mounting and Hold-Open Features

1688 Drop Plate Mounting Holes

Shows mounting hole dimensions for the 1688 Drop Plate accessory.

Thumbturn Hold-Open Feature Operation

Explains how to use the thumbturn for hold-open functionality.

Friction Hold-Open Feature Operation

Details how to adjust and use the friction holder for hold-open.

Unit Adjustments and Model Identification

Closing Power and Speed Adjustments

Guides on adjusting closing power and speed controls (Sweep/Latch).

Opening Cycle and Backcheck Control

Explains adjustments for opening cycle cushioning and backcheck.

Model Identification Guide

Provides information to identify the specific door closer model.