Assa Abloy NORTON RIXSON D6031 Series - User Manual

80-9360-1045-020 Rev 2 01/24
D6021/D6031 Series
Double Unit Push Side Power Operator
Installation Instructions
Copyright © 2023, 2024, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
This product can expose you to lead which is known to the
state of California to cause cancer and birth defects or other
reproductive harm. For more information go to:
www.P65warnings.ca.gov.
WARNING
Tools Needed
1/4-20
#7
#2 & #3
10" or 12"
3/8
Punch
Set (Inch)
Safety Glasses
Ratchet
with 11/16" socket
(required for
6031 model)
Supplied Fasteners per Operator
D6031 Push Side (Handed) 110° to 180° opening
All components above with 6030-1W main arm and rod instead of 6020-1W
D6021 Push Side up to 110° opening
NOTE: Fasteners shown are for
this specific installation.
(Fasteners for other installations
are included in the package)
2x
Union Spacer
#6-32 x 1/4"
2x
Union Door
#4-40 x 3/8"
OR
8x
Operator LAP
1/4-20 x 1/2"
1x
Arm
1/4-20 x 1/2"
2x
Adjusting Tube
& Shoe
1/4-20 x 2"
13x
Power Module Sub-assembly
Conduit Assembly
End Caps
Union Assembly
#8-32 x 5/16"
2x
Backplate
1/4-20 x 1"
5x
Backplate
1/4-20 x 5/8"
7x
Backplate
#14 x 1-1/2"
Union Assembly
(D6001U)
Union Spacer
(6001US)
End Cap - RH
(6001ENRH)
Closer Assembly
(7500LAP)
Operator LAP
(6021LAP)
Conduit Assembly
(D6001CON)
Power Module
Sub-assembly
(6001PM)
Power Supply
(6000SUP)
Inverter
(6000IN)
End Cap - LH
(6001ENLH)
Union Spacer
(6001US)
Operator LAP
(6021LAP)
Inverter
(6000IN)
Power Supply
(6000SUP)
Power Module
Sub-assembly
(6001PM)
Closer Assembly
(7500LAP)
Main Arm and Rod
(6030-1W)
Adjusting Tube
and Shoe
(6620-12) x2
Main Arm and Rod
(6020-1W) x2
Cover
(D6001COV-36
D6001COV-38
D6001COV-40
D6001COV-42
D6001COV-44
D6001COV-46
D6001COV-48)
Backplate - RH
(D6001BP-36-RH
D6001BP-38-RH
D6001BP-40-RH
D6001BP-42-RH
D6001BP-44-RH
D6001BP-46-RH
D6001BP-48-RH)
Backplate - LH
(D6001BP-36-LH
D6001BP-38-LH
D6001BP-40-LH
D6001BP-42-LH
D6001BP-44-LH
D6001BP-46-LH
D6001BP-48-LH)
Cover
(D6001COV-36
D6001COV-38
D6001COV-40
D6001COV-42
D6001COV-44
D6001COV-46
D6001COV-48)
The table below provides a list of documents associated with this product. These documents are available for download
from www.nortonrixson.com. If additional information or assistance is needed, contact Technical Product Support.
Document Title Document Number
6000 Series Double Door Installation Programming Instructions 80-9360-1049-020
Template for installing conduit holes above frame (into wall) 80-7360-1043-020
D6021 Series Template 80-7360-1052-020
D6031 Series Template 80-7360-1053-020
Approved 2024-02-13

Assa Abloy NORTON RIXSON D6031 Series Specifications