Daily Repeating
Schedule
Enabled/Disabled
Daily Repeating Schedule(s) were
enabled/disabled for User ID specified
in Alarm Level. If Alarm Level = 0xFFFF
then all users were affected.
Year Day Schedule
Set/Erased
Schedule(s) has been set/erased for
specified user ID
Year Day Schedule
Enabled/Disabled
Year Day Schedule(s) were
Enabled/Disabled for User ID specified
in Alarm Level. If Alarm Level = 0xFFFF
then all users were affected.
All Schedule Types
Erased
All Schedule Types were Set
(erased/set) for User ID specified in
Alarm Level. If Alarm Level = 0xFFFF
then all users were affected.
All Schedule Types
Enabled/Disabled
Schedule(s) has been enable/disabled
for specified user ID
Master code was changed at keypad
Master code was changed over RF
User added. Alarm level = user slot
number
After a low battery alert was observed,
the lock was powered down and
powered back up with full battery.
Door Lock needs Time
set / RF Module Power
Cycled
Power to the lock was restored and the
locks RTC was cleared. The controller
should set the time to ensure proper
logging.
Disabled user entered
at keypad
A disabled user pin code was entered
at the keypad
Valid user but outside
of schedule
A valid user can be both a normal user
and a Non-Access user. If a non-access