18
• Adjust the temperature between 0-150 degrees Fahrenheit
using the up or down arrows (suggested temp. 100 degrees
Fahrenheit).
• Once you have selected the desired temperature, press the
Set” button.
• The display will show the room temperature and
programming is finished.
Operating the Steam Wand (Automatic & Manual)
1. Using the Auto
matic Steaming Option
• Move the switch located underneath the display to the
“manual” position.
• Let the steam blow out for a few seconds.
• Move the switch to the “automatic” position, this will turn
the steam wand off.
• Insert the steam wand into the desired amount of milk.
• Press “Start”
• Once the milk has reached the proper temperature, the
steam wand will automatically stop
• To stop the automatic steaming manually, press the “Stop”
Button
• Remove the steam wand from the milk.
• Press the “manual” button for a few seconds. This will clear
the steam wand. Move the switch to the “automatic”
position to turn the steam wand off.
2. Using the Manu
al Steaming Option
• Move the switch located underneath the display to the
“manual” position.
• Let the steam blow out for a few seconds
• Move the switch to the “automatic” position; this will turn
the steam wand off.
• Place a desired amount of milk under the steam wand.
• Move the switch to the “manual” position.
• Once the milk has reached the proper temperature, move
the switch to the “automatic” position.
To Next Page
Loading...
