4
D. Grinders
CAUTION: Never put any fingers or any foreign objects into the
grinder without first unplugging it. Never put ground coffee into the
grinder, and please use ONLY whole beans.
The automatic and semi-automatic grinders are divided into three
main parts:
1. Hopper
2. Grinder Assembly
3. Doser (Dispenser)
1. Hopper
The hopper fits into the grinder collar and dispenses the beans into
the grinder. On the bottom of the hopper, there is a flap that can be
pushed closed to prevent beans from spilling out when removing
the hopper. Make sure the hopper is in the OPEN position when
the grinder is in use. On some grinders, the lid for the hopper has a
large safety magnet that extends down into the hopper. These
grinders will not work unless the lid is on.
2. Setting the Grind (Automatic & Semi-Automati
c)
The On/Off switch is located on the lower left side of the grinder.
The automatic grinder should be left in the “On” position. It will
automatically turn off once there is a sufficient amount ground in
the dosing chamber. As you use the dispenser, the grinder will
automatically grind more to replace what has been used.
The semi-automatic grinder must be turned on and off manually in
order to keep ground coffee at the desired level in the dispenser.
To Next Page
Loading...
