Astra Pro - Operating the Steam Wand (Automatic & Manual)

13
Operating the Automated Steam Wand
1. Using the Auto
matic Steaming Option
• Move the switch located underneath the display to the
“manual” position
• Let the steam blow out for a few seconds
• Move the switch to the “automatic” position, this will turn the
steam wand off.
• Insert the steam wand into the desired amount of milk.
• Press “Start”
• Once the milk has reached the proper temperature, the steam
wand will automatically stop
• To stop the automatic steaming manually, press the “Stop”
Button
• Remove the steam wand from the milk.
• Press the “manual” button for a few seconds. This will clear
the steam wand. Move the switch to the “automatic” position
to turn the steam wand off.
2. Using the Manual Ste
aming Option
• Move the switch located underneath the display to the
“manual” position.
• Let the steam blow out for a few seconds
• Move the switch to the “automatic” position; this will turn the
steam wand off.
• Place a desired amount of milk under the steam wand.
• Move the switch to the “manual” position.
• Once the milk has reached the proper temperature, move the
switch to the “automatic” position.
• Remove the steam wand from the milk.
• Press the “manual” button for a few seconds, this will clear the
steam wand. Move the switch to the “automatic” position to
turn the steam wand off.