Astralpool 66636 - Maintenance; Output Signals

22
Installation, operation and maintenance manual; Level Control System
3.2 OUTPUT SIGNALS
The relationship between the water level (n1–n4; see Fig. 1), the rods linked to the control
unit’s inlets (Y1–Y4); see Fig. 1 and Fig. 2) and the status of the relays r1 and r2 are shown
in the following table:
Relay status
Water
level
Rod Event
r1 r2
Lower than
n1
Y1
Rod has lost contact with
water
Off Off
Higher than
n2
Y2
Rod in contact with water On Off
Lower than
n3
Y3
Rod has lost contact with
water
On Off
Higher than
n4
Y4
Rod in contact with water On On
3.3 MAINTENANCE
For the maintenance of the components made of stainless steel, see the manual attached.