What does 'Inv. Overheating Warn' mean on my Astralpool Heat Pump?
If your Astralpool Heat Pump displays 'Inv. Overheating Warn', it means the transducer temperature is too high. Check and adjust the current measurement to resolve this.
What to do if my Astralpool 78543 Heat Pump shows 'Flow Switch Prot.'?
If the Astralpool Heat Pump displays a 'Flow Switch Prot.' error, it indicates there may be insufficient water in the system. To resolve this, check the pipe water flow and the water pump to ensure adequate water supply.
Why does my Astralpool Heat Pump show 'Comp. OverCur. Warn'?
If your Astralpool Heat Pump displays 'Comp. OverCur. Warn', it means the compressor electricity is too high. The compressor over-current protection is active.
What to do if my Astralpool 78543 Heat Pump warns 'Input Over Cur. Warn'?
If your Astralpool Heat Pump displays 'Input Over Cur. Warn', it indicates that the input current is too large. Check and adjust the current measurement to resolve this.
How do I fix 'Comp. Driver Failure' on my Astralpool Heat Pump?
If your Astralpool Heat Pump shows 'Comp. Driver Failure', it could be due to a lack of phase, step, or drive hardware damage. Check the measuring voltage and inspect the frequency conversion board hardware.
What does 'Inverter offline' mean on Astralpool 78543 Heat Pump?
If your Astralpool Heat Pump displays 'Inverter offline', there may be a communication failure between the frequency conversion board and the main board. Check the communication connection to resolve this.
What causes 'Exhaust Air over Temp Prot.' on my Astralpool 78543?
If your Astralpool Heat Pump is showing 'Exhaust Air over Temp Prot.', the compressor may be overloaded. Check whether the compressor system is running normally.
How to troubleshoot 'Comp. Overcurrent Prot.' on Astralpool 78543?
If your Astralpool Heat Pump displays 'Comp. Overcurrent Prot.', it suggests the compressor is overloaded. Check whether the compressor system is running normally to resolve this.
What to do for 'Anti-freezing Prot' error on Astralpool Heat Pump?
If your Astralpool Heat Pump displays 'Anti-freezing Prot', it indicates that the water flow is not sufficient. To resolve this, check the pipe water flow and ensure the water system is not jammed.
How to fix 'Communication Fault' on my Astralpool 78543?
If your Astralpool Heat Pump displays 'Communication Fault', there may be a communication issue between the wire controller and the mainboard. Check the wire connection between the remote wire controller and the main board to resolve this.
General| Brand | Astralpool |
|---|---|
| Model | 78543 |
| Category | Heat Pump |
| Language | English |
Overview of the Astral Pool Heat Pump and its features.
Critical safety guidelines for the installation and operation of the heat pump.
Detailed instructions for connecting the heat pump to the pool's water system.
Guidelines and procedures for the correct electrical hookup of the unit.
Information on assessing and managing noise levels for neighbourly installations.
Technical specifications and performance metrics for different heat pump models.
Physical dimensions and measurements for the heat pump units.
Explanation of the wire controller's main screen and button functions for operation.
Guidance on selecting operating modes and setting the desired water temperature.
Instructions for setting the unit's clock and configuring timing functions.
How to access and interpret the unit's fault records for troubleshooting.
Recommended steps for regular inspection and upkeep of the heat pump.
Important safety cautions and warnings applicable to the heat pump.
Recommended cable sizes and types for proper unit installation.
Information on the warranty period, coverage, and terms for the heat pump.
Procedures and requirements for submitting a warranty claim.
To Next Page