Astrid HALLEY E - Page 32

Front panel
OM226131 Rev. A 9
3.3 MEASURES
The following pictures shows the structure of the MEASURES menu.
<NAME> xxx KVA
<NAME> xxx KVA<NAME> xxx KVA
<NAME> xxx KVA
OUTPUT
OUTPUTOUTPUT
OUTPUT
OUTPUT measures. It is
accessed pressing the key
(see 3.3.1), pressing the keys
or
the other sub-menu are
scrolled down.
<NAME> xxx KVA
<NAME> xxx KVA<NAME> xxx KVA
<NAME> xxx KVA
BYPASS
BYPASSBYPASS
BYPASS
BYPASS measures. It is
accessed pressing the key
(see 3.3.1), pressing the keys
or
the other sub-menu are
scrolled down.
<NAME> xx
<NAME> xx<NAME> xx
<NAME> xxx KVA
x KVAx KVA
x KVA
INVERTER
INVERTERINVERTER
INVERTER
INVERTER measures. It is
accessed pressing the key
(see 3.3.1), pressing the keys
or the other sub-menu are
scrolled down.
<NAME> xxx KVA
<NAME> xxx KVA<NAME> xxx KVA
<NAME> xxx KVA
AC/DC
AC/DCAC/DC
AC/DC
DC measures. It is accessed
pressing the key
(see 3.3.1),
pressing the keys or the
other sub-menu are scrolled
down.
<NAME> xxx KVA
<NAME> xxx KVA<NAME> xxx KVA
<NAME> xxx KVA
BATTERY
BATTERYBATTERY
BATTERY
BATTERY measures. It is
accessed pressing the key
(see 3.3.1), pressing the keys
or the other sub-menu are
scrolled down.
<NAME> xxx KVA
<NAME> xxx KVA<NAME> xxx KVA
<NAME> xxx KVA
EXIT
EXITEXIT
EXIT
Pressing the key the main
menu screen is shown, pressing
the keys
or the other sub-
menu are scrolled down.
NOTE
In the following paragraphs the sub-menu will be always represented as shown in the
3Ph UPS systems; the voltage measures are always referred to the phase-to-neutral
value.
The structure of the sub-menu for the 1Ph systems remains exactly the same, but the
screens and the parameters are slightly different.