Asus D820MT - Configuring the Screen Resolution Settings; Configuring the Internet Connection Settings

82 Chapter 2: Using Windows
®
7 functions
ENGLISH
ENGLISH
Configuring the Internet connection settings
Wired connection
Windows
®
7
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE network
connection:
1. Go to Start > Control Panel > Network
and Sharing Center.
2. FromtheNetworkandSharingCenter
screen, click Change Adapter settings.
3. Right-clickonyourLANandselect
Properties.
Configuring the screen resolution settings
Windows
®
7
To configure the screen resolution settings on Windows
®
7:
1. Do any of the following to open the Screen Resolution setting screen:
 • Click > Control Panel > Appearance and Personalization > Display > Change
display settings.
 • RightclickanywhereonyourWindowsdesktop.Whenthepop-upmenuappears,click
Personalize > Display > Change display settings.
2. Select the display mode from the Multiple displays: drop-down list.
• Duplicate these displays: Select this option to use the additional monitor as a duplicate
of your main display.
• Extend these displays: Select this option to use the additional monitor as an extension
display. This increases your desktop space.
• Show desktop only on 1 / 2: Select this option to show desktop only on monitor 1 or
monitor 2.
• Remove this display: Select this options to remove the selected display.
3. Click Apply or OK. Click Keep Changes on the confirmation message.