4-20 Chapter 4: Software support
Chapter 4
4.6.4 Using a USB oppy disk drive
Due to OS limitation, Windows
®
containing the RAID driver.
2. Right-click My Computer on the
Windows
®
desktop or start menu,
and then select Manage from the
pop-up window.
3. Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy, and
then select Properties from the pop-up
window.
drive varies with different vendors.
or
3. When prompted to select the SCSI adapter to install, select the RAID driver for the
corresponding OS version.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver for Windows
®
Vista or later OS
1. During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
the optical drive, and then click Browse.
3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.
you have to use another computer
4. Click Details tab. The Vendor ID (VID)
and Product ID (PID) are displayed.
To Next Page
Loading...
