Asus M4A89GTD PRO Series - USB Configuration

ASUS M4A89GTD PRO Series 3-27
Chapter 3
HD Audio Azalia Device [Enabled]
Allows you to enable or disable the HD Audio controller.

The following three items appear only when you set the HD Audio Azalia Device item to
[Enabled] or [Auto].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

[AC 97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
 
SPDIF OUT Type [SPDIF]
If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out
header, you need to set to HDMI for HDMI audio output.
[SPDIF] Sets to [SPDIF Output] for SPDIF audio output.
[HDMI] Sets to [HDMI Output] for HDMI audio output.
On Board ATA Controller [Enabled]
[Enabled] Enables the onboard ATA controller.
[Disabled] Disables the controller.
On Board ATA Controller ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
[Enabled] Enables the onboard ATA controller ROM.
[Disabled] Disables the onboard ATA controller ROM.
Onboard USB 3.0 Controller [Enabled] (M4A89GTD PRO/USB3 model only)
[Enabled] Enables the USB 3.0 controller.
[Disabled] Disables the controller.
3.6.4 USB Conguration
The items in this menu allow you to change the USB-related features. Select an item and

USB Conguration
Module Version - 2.24.5-13.4
USB Devices Enabled:
2 Hubs
USB Support [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
BIOS SETUP UTILITY
Advanced