Asus P11C-C/4L - Page 36

2-20
Chapter 2: Hardware Information
2. VGA controller setting (3-pin VGA_SW1)
ThisjumperallowsyoutoenableordisabletheonboardVGAcontroller.Settopins1–2
toactivatetheVGAfeature.
3. LAN controller setting (3-pin LAN_SW1-4)
ThesejumpersallowyoutoenableordisabletheonboardLAN_SW1-4.Settopins1-2
toactivatetheGigabitLANfeature.