3-3
P11C-C/4L
Pressing the power switch for more than four seconds lets the system enter the soft-off
mode regardless of the BIOS setting.
3.2 Poweringoffthecomputer
3.2.1 UsingtheOSshutdownfunction
UsingWindows
®
Server 2012 R2:
1. Press <Ctrl>+<Alt>+<Del>.
2. Click on the Power icon on the lower right side of the screen.
3. Select Shut down.
4. In the
Shutdown Event Tracker
, select the Other (Planned) option in the selection
list. Otherwise, select the option that best describes why you want to shut down the
computer.
5. Click Continue.
UsingWindows
®
Server 2016:
1. Press <Alt>+<F4>.
2. In the
What do you want the computer to do?
, select Shut down.
3. In the
Shutdown Event Tracker
, select the Other (Planned) option in the selection
list. Otherwise, select the option that best describes why you want to shut down the
computer.
4. Click OK.
3.2.2 Usingthedualfunctionpowerswitch
While the system is ON, press the power switch for less than four seconds to put the system
to sleep mode or to soft-off mode, depending on the BIOS setting.