Asus P7P55 WS SUPERCOMPUTER User Manual

ASUS P7P55 WS SuperComputer 5-7
5.2.3 Installing three SLI-ready graphics cards
1. Prepare three SLI-ready graphics
cards.
2. Insert the three graphics card
into the PCIEX16 slots. If your
motherboard has more than two
PCIEX16 slots, refer to Chapter 2
in this user manual for the locations
of the PCIEX16 slots recommended
for multi-graphics card installation.
3. Ensure that the cards are properly
seated on the slots.
 

on each graphics card. Ensure that

5. Connect three independent auxiliary
power sources from the power
supply to the three graphics cards
separately.
6. Connect a VGA or a DVI cable to
the graphics card.
3-Way SLI bridge

Asus P7P55 WS SUPERCOMPUTER Specifications

General

Form Factor	ATX
Chipset	Intel P55
CPU Socket	LGA 1156
Memory Slots	4 x DIMM
Memory Type	DDR3
Maximum Memory	16 GB
Storage Interface	6 x SATA 3Gb/s
USB Ports	12 x USB 2.0
LAN	2 x Gigabit LAN
Audio	8-channel HD Audio
Expansion Slots	3 x PCIe x16, 1 x PCIe x4, 1 x PCI