3.4.9 OC Tuner limit Value [Good Performance]
Set an auto-adjustment limit value for OC Tuner Utility.
3.4.10 DRAM Timing Control [Auto]
The items in this menu allow you to set the DRAM timing control features.
depending on the
DIMMs you install on the motherboard.
1st Information: 7-7-7-20-4-59-9-6-20
The values vary depending on your settings of the following sub-items:
DRAM CAS# Latency [Auto]
Clock] [11 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Clock] [10 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Clock] [10 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Clock] [31 DRAM Clock]
DRAM RAS# to RAS# Delay [Auto]
DRAM REF Cycle Time [Auto]
[48 DRAM Clock] [60 DRAM Clock] [72 DRAM Clock] [82 DRAM Clock]
[88 DRAM Clock] [90 DRAM Clock] [100 DRAM Clock] [110 DRAM Clock]
DRAM WRITE Recovery Time [Auto]
DRAM READ to PRE Time [Auto]
DRAM FOUR ACT WIN Time [Auto]
To Next Page
Loading...
