The USB Devices Enabled item shows the auto-detected values. If no USB
device is detected, the item shows None.
USB Support [Enabled]
[Enabled] Enables the USB Host Controllers.
[Disabled] Disables the controllers.
The following items appear only when you set USB Functions to [Enabled].
Legacy USB Support [Auto]
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
[Enabled] Enables the support for USB devices on legacy operating systems
(OS).
[Disabled] Disables the function.
BIOS EHCI Hand-off [Enabled]
[Enabled] Enables the support for operating systems without an EHCI
hand-off feature.
[Disabled] Disables the function.
The items in this menu allows you to change the USB-related features. Select an
BIOS SETUP UTILITY
Advanced
USB Conguration
Module Version - 2.24.3-13.4
USB Devices Enabled:
2 Hubs, 1 Drive
USB Support [Enabled]
Legacy USB Support [Auto]
BIOS EHCI Hand-off [Enabled]
Enable support for
all USB ports.
To Next Page
Loading...
Need help?
General
