8. CPU, chassis, and power fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1–3, 3-pin PWR_FAN)
The fan connectors support cooling fans of 350 mA–2000 mA (24 W max.)
or a total of 1 A–7 A (84 W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, ensuring that the black wire of each cable
matches the ground pin of the connector.
not jumpers! DO NOT place jumper caps on the fan connectors!
9. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can
also helps enhance network security, protects digital identities, and ensures
platform integrity.
The TPM module is purchased separately. Use the ASUS TPM module ONLY!
To Next Page
Loading...
