EasyManuals Logo

Asus P8H67-M LE User Manual

Asus P8H67-M LE
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
1-30 Chapter 1: Product introduction
1.11 Onboard switches
Onboard switches allow you to ne-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to
enhance system performance.
MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system boot failure,
and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the
MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility
tuning for successful boot.
Refer to section 1.12 Onboard LEDs for the exact location of the DRAM_LED.
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the system
and reinstall the DIMM before using the MemOK! function.
The MemOK! switch does not function under Windows® OS environment.
During the tuning process, the system loads and tests failsafe memory settings. It takes
about 30 seconds for the system to test one set of failsafe settings. If the test fails,
the system reboots and test the next set of failsafe settings. The blinking speed of the
DRAM_LED increases, indicating different test processes.
Due to memory tuning requirement, the system automatically reboots when each timing
set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the
DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the
Memory QVL (Qualied Vendors Lists) in this user manual or on the ASUS website at
www.asus.com.
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn off
the computer and unplug the power cord for about 5–10 seconds.
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you that
the BIOS has been restored to its default settings.
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
P8H67-M
P8H67-M MemOK! switch

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus P8H67-M LE and is the answer not in the manual?

Asus P8H67-M LE Specifications

General IconGeneral
Form FactorMicro ATX
ChipsetIntel H67
CPU SocketLGA 1155
Maximum Memory32GB
Memory TypeDDR3
PCIe x16 Slots1
PCIe x1 Slots2
PCI Slots1
Audio ChipsetRealtek ALC887
LAN ChipsetRealtek 8111E
Max. LAN Speed10/100/1000Mbps
RAID SupportRAID 0, 1, 5, 10
Memory Slots4
Memory StandardDDR3 1333/1066 MHz
SATA 6Gb/s2
USB 2.0 Ports10
USB 3.0 Ports2
Audio Channels8
Video PortsDVI, VGA

Related product manuals