3-2
Chapter 3: General Instructions
Max Refresh Rate 165 Hz• : allows you to select a maximum refresh rate
of 165Hz (Only for DisplayPort input). After selecting, press the ( )
button twice to activate the setting.
After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA Control
Panel. If you don’t see an image, disconnect the DP cable and use the monitor
OSD to try again with a safer Max Refresh Rate.
Blue Light Filter2.
In this function, you can adjust the blue light filter level.
Level 0: • No change.
Level 1~4:• The higher the level, the less blue light is scattered. When
Blue Light Filter is activated,the default settings of Racing Mode will
be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
Users should take some time away from the display if working for long •
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
To minimize eye strain and dryness in your eyes, users should rest the eye •
periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these exercises •
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
High energy blue light may lead to eye strain and AMD (Age-Related •
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
To Next Page
Loading...
Need help?
General