2.3 Safety Signs
The safety signs are located in/on the machine as indicated. (Descriptions of the
symbols are provided in section 2.2)
Key
1. Crush hazard (lift arms)
2. Fall hazard
3. Read operator’s manual / fall hazard / fire notice (inside cab enclosure)
4. Skin (oil) injection hazard
5. Entanglement hazard (engine compartment)
6. Explosion / burn hazard (fuel)
7. Clean undercarriages notice (one on each side of machine)
8. Tie down location (found on both sides)
9. Crush hazard (run over)
10. Crush hazard (lift arm brace)
To Next Page
Loading...
