7 MAINTENANCE
92
VT-70 High Output US ISO O&M
0404-853 2019-09
7.21.2 Removal From Storage
Perform the following tasks to remove the VT-70 High Output Compact Track
Loader from storage and return to operating condition.
Return to Operating Condition:
• Remove protective lubricant from cylinder rods.
• Lubricate all chassis, lift arm and undercarriage points.
• Safely remove the mechanical supports and lower machine to the ground.
• Install fully charged battery.
• Remove exhaust outlet cover.
• Perform pre-operation safety checklist in chapter 5 of this manual.
• Perform starting procedure (chapter 5)
• Let engine run while observing engine monitoring systems (gauges/lights). Look
for anything out of the ordinary. Should the engine coolant temperature exceed
the normal range or should oil pressure read abnormally low or hydraulic oil
temp. read abnormally high, shut the machine down immediately. Diagnose and
make needed repairs before resuming operation.
To Next Page
Loading...
