EN 52
DESCALE MODE
When you see the message (see the below picture 1) on the display, the machine needs to
be descaled.
1
Pour 500 ml mixed solution of descaler
and clean water in the water tank.
Regarding to mixing ratio, refer to the
user manual of descaler.
2
Close the lid of water tank before
installing into main unit.
3
Turn the FUNCTION KNOB to “OFF”
position.
4
Close the door and press and
hold down both END TIME and
WEIGHT/TEMP for 3 seconds.
The machine displays 50 minutes
and starts descaling.
Cleaning Mode: 40 min
Rinse Mode: 10 min
To Next Page
Loading...
