EN 54
Oven door glass (only for DX6411B/DX6411F/DX6492F)
The oven door is equipped with three sheets of glass placed against
each other. These sheets can be removed for cleaning.
Door glass removal
The oven door is equipped with three sheets of glass placed against
each other. These sheets can be removed for cleaning.
1
Remove the two screws on the left and right sides of
the door.
2
Detach the covering and remove glass 1 from the door.
3
Lift glass 2 and remove the two holder glass rubbers from
the top of the sheet. Clean the sheets with warm water or
washing-up liquid and polish dry them with a soft clean
cloth.
Door glass attaching
Repeat steps 1, 2 and 3 in reverse order.
• When assembling the inner glass 1, put printing to the lower
direction.
Attention: The glass may break if you use excessive force
especially at the edges of the front sheet.
Warning:
• Whenever the door is separated from the oven, the clips should be
flipped open.
• Do not use harsh abrasive cleaners or metal scrapers to clean the
oven door; they can scratch the surface, which may cause the
glass to shatter.
• When the door is mounted, removing some of the parts (the door
glass or some other part) from the door may result in injury.
CLEANING AND CARE
To Next Page
Loading...
