EasyManuals Logo

Atag HI6071M User Manual

Atag HI6071M
Go to English
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
GB 27
installation
general
Only a qualified electrician should connect the hob to the
mains supply!
The installation should be performed in accordance with the
applicable national and local regulations. Damage caused by
improper installation or connection is not covered by the
guarantee.
safety instructions
For the appliance to work well, it is important:
• That there is sufficient ventilation to allow the hob to cool
down, in accordance with the possibilities specified in this
chapter.
• The ventilation air drawn in by the hob must not be warmer
than 35 °C. Bear this in mind if the oven is to be built in
under the hob.
• That the connecting cable hangs freely and is not caught by
a drawer.
• The worktop is flat.
• If the hob is to be built in any nearer than 40 mm from an
adjacent wall or kitchen cabinet, either to the back or side
of the appliance, the wall or cabinet should be lined with a
heat resistant material.
overall dimensions
644
522
48
560
490
100 cm
2
700001624100 HL HI6071M.qxp 12-10-2005 12:09 Pagina GB 27

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag HI6071M and is the answer not in the manual?

Atag HI6071M Specifications

General IconGeneral
BrandAtag
ModelHI6071M
CategoryHob
LanguageEnglish

Related product manuals