EasyManuals Logo

Atag HI6071T User Manual

Atag HI6071T
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
133
For the appliance to work well, it is important:
That there is sufficient ventilation to allow the hob to cool down, in
accordance with the possibilities specified in this chapter.
The ventilation air drawn in by the hob must not be warmer than
35 °C. Bear this in mind if the oven is to be built in under the hob.
That the connecting cable hangs freely and is not caught by a drawer.
The worktop should be a minimum of 2.8 cm and a maximum of
5 cm thick.
The worktop is flat.
INSTALLATION safety prescriptions
132
The next deviant connections are possible too:
1 phase connection
1 positive + 1 negative 1N a.c. 230 V
The fuse box in your home must be fitted with a 32 A fuse.
3 phase connection
3 positive without negative 3 a.c. 230 V
The fuse box in your home must be fitted with a 16 A fuse.
INSTALLATION electrical connection
NL
230V
blue
brown
grey
black
yellow/green
negative connection N
(blue and brown)
positive connection L
(grey and black)
L3 L2 L1
230V
230V
230V
blue
brown
grey
black
yellow/green
positive connection L1
(grey)
positive connection L2
(black)
positive connection L3
(blue and brown)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag HI6071T and is the answer not in the manual?

Atag HI6071T Specifications

General IconGeneral
BrandAtag
ModelHI6071T
CategoryHob
LanguageEnglish

Related product manuals