AT&T 610 - Page 58

TeraiDal Setup
Page 5- 6
Option
Reverse Video
Volume
Keyclick
Cursor Type
Cursor Blink
Labels
Selections
yes
no*
1 (quietest)
2
3
4*
5
6
7
(loudest)
on
off*
line
blck*
yes
no*
off
on*
Description
User"'s Guide
August 1985
If set to "yes," the entire screen
will become 'light with dark
characters when not in the SET UP
state; if set to "no," the entire
screen will be dark with light
characters. The dark screen with
light characters is the normal
condition.
This option controls the volume of
the keyclick and bell. As this
option is changed, the keyboard
will generate a keyclick to
indicate the new volume selection.
With the cursor positioned on this
option, Control G will cause the
keyboard bell to ring.
This option determines whether or
not the keyboard will generate an
audible click when a key is
depressed.
If set to "blck," the cursor will
appear as a rectangle; if set to
"line," the cursor will appear as
an underscore.
If set to "yes," the cursor will
alternate between being normal and
half intensity (blinking); if set
to "no," the cursor will remain in
a visible, nonchanging state.
If set to "on," the function key
screen labels will be displayed
when the terminal is in the normal
Operational mode; if set to "off,"
the labels will not be displayed.
If the terminal is in SETUP, the
function key screen labels are
displayed regardless of the option
selection. If currently "off" and
Fkey keys are downloaded from a
remote host, this option will be
changed to "on.