11
Voice Message Options
Voice mail signals are sent in two different ways (FSK or Stutter). This
phone automatically detects and uses the method used by your voice mail
service. (Your service provider can give you more information about your
service.) If you move or change service providers, you may need to use
the RESET or RESET & LOCK softkeys as described below to avoid missing
messages.
Occasionally the system will receive a false voice mail signal from your
provider and the NEW CALL light will flash. To turn off the light, follow
the directions below to use the LIGHT OFF softkey.
1 After selecting VOICE MSG, use the softkey to select the line
whose light is incorrect.
2 Select OK to move to the screen with the LIGHT OFF softkey.
Select LIGHT OFF.
3 Use the softkey to turn message waiting ON or OFF for the line you
selected. Choosing ON will advance to the options choices below.
(If you choose OFF the system returns to the main menu).
OPTION DESCRIPTION
LIGHT OFF Turns off the flashing NEW CALL light.
RESET Turns on stutter dial tone detection for selected
line. (Disabled when FSK signal is received.)
RESET & LOCK Turns on stutter dial tone detection for selected
line. (Will not disable when FSK signal is received.)
OK Exit to main options menu.
PROGRAMMING OPTIONS
To Next Page
Loading...
Need help?
General
