Conference Calls
You can use both lines at the same time to set up a three-way
conference call.
1 Make or answer a call and press H.
2 Establish a call on the other line.
3 Press C.
4 Hang up to end a conference call.
If one caller hangs up during a conference call, you might hear a dial tone.
Press the LINE button of the remaining call to disconnect the other line
and eliminate the dial tone.
NOTE: Under certain circumstances, the far-end parties on a conference
call may not hear one another clearly.
Conference Call Options
To place a conference call on Hold:
1 Press H to hold both lines.
2 Press C to release Hold and continue
your conference call.
To talk privately with one caller:
1 Press H.
2 Press the LINE button of the person with whom you want to
speak privately.
3 Press C to continue your conference call.
To disconnect one party from a conference call and keep the other
on the line, press the LINE button of the call you want to continue.
TELEPHONE OPERATION
16
To Next Page
Loading...
Need help?
General
