11
Telephone settings
Use the menu to change the telephone settings.
Press MENU/SELECT repeatedly until the screen displays the desired feature.
Press CID or DIR until the screen displays the desired setting.
Press MENU/SELECT to save your selection and move to the next feature.
NOTE: Press CANCEL to cancel an operation or exit the menu.
Set date and time
When the telephone is idle, the screen shows the date and time. If
you subscribe to caller ID service, the day, month and the time are set
automatically with each incoming call. You may also set the date and time
manually by following the steps below.
Press MENU/SELECT, the screen displays
DATE/TIME and USE # FOR AM/PM alternatively.
Use the dial pad keys (0-9) to set the month, or
press DIR to skip to set the day.
Use the dial pad keys (0-9) to set the day, or press
DIR to skip to set the hour.
Use the dial pad keys (0-9) to set the hour, or press
DIR to skip to set the minute.
Use the dial pad keys (0-9) to set the minute.
Press # (pound key) to select between AM or PM.
Press MENU/SELECT to save your setting and move
to the next menu setup.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
DATE/TIME
12:00
AM
1/01
USE # FOR AM/PM
12:00
AM
1/01
Telephone settings
To Next Page
Loading...
Need help?
General
