21
Directory
Create directory entries
Store a directory entry
Follow the steps below to store a new entry in the directory.
When the telephone is idle, press DIR to enter the
directory menu.
Press CID or DIR until STORE is blinking.
Press MENU/SELECT.
When the screen displays ENTER NUMBER, use the
dialing keys to enter a telephone number (up to
24 digits).
Press DELETE X to erase a digit.
Press CID or DIR to move the cursor to the left
or right.
Press REDIAL/PAUSE to insert a three-second
dialing pause (a P appears).
-OR-
Press and hold REDIAL/PAUSE to copy the last number
dialed.
Press MENU/SELECT.
When the screen displays ENTER NAME, use the
dialing keys to enter a name (up to 15 characters).
Additional key presses produce other characters on
that key (see the Character chart on page 20).
Press DELETE X to erase a character.
Press CID or DIR to move the cursor to the left
or right.
Press MENU/SELECT to save. Then the screen displays STORED then returns
to directory menu.
NOTES:
If you enter more than 24 digits in a telephone number in step 4 above, the screen shows
ONLY 24 ALLOWED.
If you enter more than 15 characters in a name in step 6, the screen shows ONLY 15
ALLOWED.
If you try to store more than 25 entries in the directory, the screen displays MEMORY FULL.
You must delete an existing directory entry before you can store a new one.
1.
2.
3.
4.
•
•
•
5.
6.
•
•
7.
•
•
•
ENTER NUMBER
8003604121_
ENTER NAME
ROBERT BROWN
STORED
Blinking
REVIEW STORE
To Next Page
Loading...
Need help?
General
