Answering system
118
Message playback
Options during playback
When a message is playing, you can adjust the playback volume,
skip, repeat, pause or delete the message.
When messages are playing on the telephone base:
Press VOLUME+ or VOLUME- to adjust the message
playback volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press twice to hear the
previous message.
Press X/DELETE to delete the message.
Press /PLAY/STOP to stop the playback.
When messages are playing on the handset:
Press CID/VOLUME or DIR/VOLUME to adjust the message
playback volume.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous
message.
Press MUTE/DELETE to delete the message.
Press 5 or to stop the playback.
Press /SPEAKER to switch between speakerphone mode and
handset mode.
Press to stop playback. The screen shows
Call back?, then press MENU/SELECT or to call
back the caller if the caller’s number is available. If the dialing
format used is not correct, then use the following option to
choose the correct dialing format before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID
information if available. From here, you can press
to resume playback, or press # (pound key) repeatedly to show
the desired dialing option (page 62), then press MENU/SELECT
or to call back the caller. If you do not call back
within ten seconds, message playback resumes automatically.
To Next Page
Loading...
Need help?
General
