Smart call blocker
72
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by
default.
1. Press CALL BLOCK on the handset when it is
not in use, and then press
MENU/SELECT to
select SCB On/Off.
-OR-
Press MENU/
SELECT to enter the main menu
when the handset is not in use. Press CID or
DIR to scroll to Smart call blk, then press
MENU/SELECT twice.
2. Press
CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You
hear a confirmation tone.
Control calls without numbers
Use this setting to control “out of area” or “Private” calls. You can
choose to allow or reject these calls directly. You can also choose to
screen them with or without learning the callers’ names before you
decide whether to answer or reject these calls. Moreover, you can
forward these calls to the answering system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu
when the handset is not in use. Press CID or
DIR to scroll to Smart call blk, then press
MENU/SELECT.
Answering sys
>Smart call blk
Answering sys
>Smart call blk
>SCB On/Off
Block list
To Next Page
Loading...
Need help?
General
