Telephone settings
20
Handset settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without
having to look at the display. When you have an incoming call, the
handset and/or base speaks “Call from...” and the name of the caller
based on the directory or caller ID information. If the caller’s name is
private or unknown, the phone number up to the last 11 digits will be
announced. If the caller’s phone number is also private or unknown, no
information will be announced. The default setting is On.
To turn on or o the caller ID announce feature:
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use
CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Use
CID or DIR to scroll to Caller ID annc,
then press MENU/SELECT.
4. Use
CID or DIR to highlight the desired option,
then press MENU/SELECT.
Set all On/O - Change the setting for the
base and all handsets.
Local handset - Change the setting for that
handset only.
Base - Change the setting for the telephone
base only.
5. Use
CID or DIR to highlight On or Off, then press
MENU/SELECT. There is a confirmation tone and the screen
returns to the previous menu. If you change the setting to Set all
On/Off, the screen shows CID Annc ON/OFF on all HS & BS.
HS CID ANNOUNCE
>On
CALLER ID ANNC
>Local handset
LCD language
>Caller ID annc
To Next Page
Loading...
Need help?
General
