Multiple handset use
44
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press
and hold [PTT] to talk.
2. When the other party is speaking, your speakerphone light is
on, and your device shows PTT From HS X To HS X
X represents the initiating handset number, and the second X
represents your handset number; a maximum of four handset
numbers appear).
3. Press
and hold [PTT] to talk), press and hold PUSH TO TALK on your
handset. You will hear a chirp. Speak towards the device.
While you are speaking, your device shows PTT To handset: X
(X represents the handset numbers of one or more
destination handsets; a maximum of four handset numbers
appear).
Your voice is broadcast to all destination devices.
PUSH TO TALK. Your device will beep.
press and hold PUSH TO TALK to continue speaking.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows Intercom.
2. Press
MENU/SELECT. Your device displays Calling other handset
or Calling HANDSET X
Push to talk Ended and then Other handset is calling or
HANDSET X is calling. The destination device rings.
3. Press
or any dialing keys (0-9,
#
or TONE ) on
the destination device to answer the intercom call. Both devices
now show Intercom.
4. To end the intercom call, press
on your handset
or place the handset in the telephone base or charger. Both
screens show Intercom ended.
To Next Page
Loading...
Need help?
General
