4
Installation
Install the telephone base close to a telephone jack and a power outlet
surface or vertically mounted on the wall (see page 18). For optimum
range and better reception, place the telephone base in a central and open
location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
line cord and the telephone wall jack (see page 11
and caller ID problems caused by DSL interference. Please contact your DSL
Your product may be shipped with protective stickers covering the handset
and telephone base displays - remove them before use.
For customer service or product information, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base and charger too close to:
f Communication devices such as television sets, VCRs, or other cordless
telephones.
f Excessive heat sources.
f
f Excessive dust sources such as a workshop or garage.
f Excessive moisture.
f Extremely low temperature.
f Mechanical vibration or shock such as on top of a washing machine or
workbench.
Getting started
See pages
13-15 for
easy instructions.
You must install and
charge the battery
before using the
telephone.
STOP!
To Next Page
Loading...
