Directory
53
Create directory entries
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main
menu.
2. PressqCID or pDIR to scroll to Directory, then press
MENU/SELECT.
3. Press qCID or pDIR to highlight Add contact.
4. Press MENU/SELECT.
5. Use the dialing keys to enter a telephone number (up
to 30 digits) when prompted.
f Press qCID or pDIR
or right.
f Press MUTE/DELETE to erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to enter a
three-second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE, then qCID or pDIR, or pressing
REDIAL/PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
f The screen shows Number already saved if the
number is already in the directory. You cannot save
the same number twice.
7. Use the dialing keys to enter a name (up to 15
characters) when prompted. Each time you press a
key, the character on that key appears. Additional key
presses produce other characters on that key. See the chart on next
page.
f Press qCID or pDIR
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
Smart call blk
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445
_
Saved
ENTER NAME
Robert Brown_
To Next Page
Loading...
