AT&T CL82229 - Ringer Volume

Telephone settings
21
Handset settings
Ringer volume
You can set the ringer volume level to one of six

appears on the screen.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select
Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There

previous menu.
Notes:
f The handset ringer volume also determines the ringer volume for intercom calls.
f If the ringer volume is set to off, that handset is silenced for all incoming calls except paging tone.
f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly
display Caller ID won’t be announced.
> Ringer volume
Ringer tone

>Ringers
Intercom
RINGER VOLUME