Multiple handset use
43
Intercom
Use the intercom feature for conversations between two handsets,
or a handset and a cordless headset/speakerphone (sold separately).
You can purchase expansion handsets (AT&T model CL80119),
cordless headsets, and speakerphones (AT&T model TL80133) for this
telephone base to expand your telephone system (up to 12 handsets,
cordless headsets or speakerphones).
Using a handset to initiate intercom calls:
1. Press MENU/SELECT in idle mode to enter the main
menu. Press qCID or pDIR to scroll to Intercom,
then press MENU/SELECT.
f If you have a two-handset system and no
other registered devices, the handset shows
Calling other handset.
f If you have more than two handsets and/
or cordless headset(s)/speakerphone(s), the
handset shows INTERCOM TO:. Use the dialing
keys to enter a specific device number (1-9
for handsets 1-9, TONE followed by 0-2
for handsets 10-12,
#
for a single headset/
speakerphone,
#
followed by 1 or 2 for
headset/speakerphone 1 or 2, or TONE
followed by
#
for all devices), or press qCID or
pDIR to scroll to the desired handset and press MENU/SELECT.
Your handset screen shows Calling HANDSET X or Calling all
handsets.
The destination handset(s) rings and shows Other handset
is calling, HANDSET X is calling or HANDSET X is calling all
(HANDSET represents the handset name, X represents the
handset number).
2. To answer the intercom call, press , /SPEAKER
or any dialing key (0-9, TONE , or
#
) on the called device. Both
devices now show Intercom.
Calling
HANDSET X
HANDSET X
is calling
Intercom
11:35
AM
12/02
To Next Page
Loading...
