AT&T CL82229 - Set Date;Time

Telephone settings
23
Handset settings
Set date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week

the date and time settings of the caller ID service and set the date
and time manually (see Use caller ID to automatically set date
and time on page 30).

you to set the date and time.
To set the date and time manually:
1. When the handset is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Set date/time
and then press MENU/SELECT.
3. Press qCID or pDIR to select the month, then
press MENU/SELECT, or enter the number using
the dialing keys.
4. Press qCID or pDIR to select the day, then press
MENU/SELECT, or enter the number using the
dialing keys.
5. Press qCID or pDIR to select the year, or enter the
number using the dialing keys, then press
MENU/SELECT to move on to set the time.
6. Press qCID or pDIR to select the hour, then press
MENU/SELECT, or enter the number using the dialing keys.
7. Press qCID or pDIR to select the minute, then press
MENU/SELECT, or enter the number using the dialing keys.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Ringers
>Set date/time