Telephone settings
20
Telephone base settings
Use the menu to change the telephone settings.
1. Press MENU/SELECT on the telephone base when it is
not in use to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be
changed. When scrolling through the menu, the
> symbol indicates the selected menu item.
3. Press MENU/SELECT to select the highlighted item.
NOTE: Press CANCEL to cancel an operation, back up to the previous menu or exit the
menu display. Press and hold CANCEL to return to idle mode.
Go to Answering system settings starting on page 68 for instructions on
how to use the telephone base to modify the answering system settings
shown below.
Setting Page
Announcement (play, record and delete)
68-70
Answer on/off
71
Call screening
72
Number of rings
73
Remote access code
74
Message alert tone
75
Message recording time
76
>Play messages
Answering sys
p
q
To Next Page
Loading...
Need help?
General
