AT&T CL83451 User Manual

21
Telephone settings
Telephone base settings
Ringer volume
You can set the ringer volume level to one of six levels or
turn the ringer off. When the ringer is off, appears on
the screen.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select >Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
NOTES:
The telephone base ringer volume also determines the ringer volume for intercom calls.
If the ringer volume is set to off, the telephone base is silenced for all incoming calls.
If the ringer volume is set to off, caller ID will not be announced and
Caller ID won’t be announced displays briefly on the screen.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to >Ringer tone, then
press MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
•
•
•
> Ringer tone
Ringer volume
p
q
RINGER TONE
> Tone 1
p
q
> Ringer volume
RINGER VOLUME
p
q
Ringer tone
p
q
>Ringers
Intercom
p
q

AT&T CL83451 Specifications

General

Brand	AT&T
Model	CL83451
Category	Cordless Telephone
Language	English