Multiple handset use
49
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your device shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows >Intercom.
Press MENU/SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briefly shows
Push to talk Ended and then HANDSET X is calling or BASE 0 is calling.
The destination device rings.
Press PHONE/FLASH or any dialing keys (0-9,
#
or TONE ) on the
destination handset, or press /SPEAKER or any dialing keys (0-9,
#
or
TONE ) on the telephone base to answer the intercom call. Both devices
now show Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the telephone base or charger, or press CANCEL on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a one-to-one PTT call, press PHONE/FLASH on your handset or
/SPEAKER on the telephone base. The PTT call ends automatically and
the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on the
initiating handset or /SPEAKER on the initiating telephone base. The
PTT call ends automatically and the outside call is answered.
During a PTT call to multiple devices, press PHONE/FLASH on any one
of the destination handsets, or press /SPEAKER on the destination
telephone base. That device answers the outside call. The PTT call
continues for the rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.
1.
2.
3.
4.
•
•
•
•
To Next Page
Loading...
Need help?
General
