Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU to enter
the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press SELECT.
3. Press SELECT again to select Announcement.
4. Press SELECT to select Record annc. The system
announces, “Record after the tone. Press STOP when you are done.”
5. Speak towards the handset to record your announcement. Press STOP to
end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and
press SELECT.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU to enter the main menu.
2. Press SELECT to select Answering sys.
3. Press SELECT again to select Announcement.
4. Press SELECT to select Record annc. The system
announces, “Record after the tone. Press STOP when you are done.”
5. Speak towards the telephone base to record your announcement. Press
STOP to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and
press SELECT.
102
Recording
announcement...
STOP
Recording
announcement...
STOP
To Next Page
Loading...
Need help?
General
