Answering system
104
Answering system settings
Using the telephone base:
1. When the telephone base is in idle mode, press MENU to enter the
main menu.
2. Press SELECT to select Answering sys.
3. Press SELECT again to select Announcement.
4. Press qCALLER ID or pDIRECTORY to scroll to Play annc, then
press SELECT..
5. While the announcement is playing, press X/DELETE to delete the
announcement. The system announces “Announcement deleted”.
-OR-
1. When the telephone base is in idle mode, press MENU to
enter the main menu.
2. Press SELECT to select Answering sys.
3. Press SELECT again to select Announcement.
4. Press qCALLER ID or pDIRECTORY to scroll to
Reset annc, then press SELECT. The screen
shows Reset to default annc?
5. Press YES to confirm. The screen shows
Annc. reset to default.
When your announcement is deleted, the system answers calls with the
default announcement described on page 101. You cannot delete the default
announcement.
Reset to
default annc?
YES
NO
Annc. reset
to default
To Next Page
Loading...
Need help?
General
