AT&T CRL32102 - LCD Language; Caller ID Announce

14
Telephone settings
Handset settings
LCD language
You can select the language used for all screen displays.
Press MENU/
SELECT in idle mode to enter the main
menu.
Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
Press
MENU/SELECT to choose >LCD language.
Press
qCID or pDIR to highlight >English, >Français
or >Español, then press MENU/SELECT. The screen
prompts Set English/Français/Español as LCD
language?
Press
MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press MENU/SELECT on
the handset in idle mode, then enter 364#. There is a confirmation tone.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller’s phone
number is also private or unknown, no information will be announced. The
default setting is On.
To turn on or off the caller ID announce feature:
Press MENU/
SELECT in idle mode to enter the main menu.
Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
Use
qCID or pDIR to scroll to >Caller ID annc, then
press MENU/SELECT.
Use
qCID or pDIR to highlight the desired option, then
press MENU/SELECT.
Set all On/Off - Change the setting for the base
and all handsets.
Local handset - Change the setting for that
handset only.
Base - Change the setting for the telephone base only.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
>LCD language
Caller ID annc
LCD language
>Caller ID annc
CALLER ID ANNC
>Set all On/Off
LCD LANGUAGE
>English