AT&T CRL32102 - View Dialing Options; Dial a Caller ID Log Entry; Delete Caller ID Log Entries

41
Caller ID
View dialing options
Although the incoming caller ID log entries have 10
digits (the area code plus the seven-digit number),
in some areas, you might need to dial only the 7
digits, 1 plus the seven digits, or 1 plus the area code
plus the seven digits. You can change and store the
number of digits that you dial in the caller ID log.
While reviewing the caller ID log, press # repeatedly
to show different dialing options for local and
long distance numbers before dialing or saving the
telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1
in front of the telephone number before dialing or
saving it in the directory.
When the number is in the correct format for dialing, press
PHONE/FLASH
or /SPEA�ERSPEA�ER to call the number.
To save the number to the directory, see Save a caller ID log entry to the
directory on the next page.
Dial a caller ID log entry
1. When in the caller ID log, press q
CID or DIRp to browse.
2. Press
PHONE/FLASH or /SPEA�ERSPEA�ER to dial the displayed entry.
Delete caller ID log entries
To delete an entry:
Press
MUTE/DELETE to delete the shown entry.
To delete all entries:
1. Press MENU/SELECT when in idle mode.
2. Press qCID or pDIR to scroll to >Caller ID log, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Del all calls, then press MENU/SELECT.
4. When the screen shows Delete all calls?, press MENU/SELECT to confirm.
There is a confirmation tone and the screen returns to the previous menu.
•
Robert Brown
800-360-4121
10/20
10:45
PM
Press # 1-800-360-4121
Press # 360-4121
Press # 1-360-4121
Press # 800-360-4121
Press 1 1-800-360-4121
Press 1 800-360-4121
-OR-
Caller ID operation