EasyManua.ls Logo

AT&T CRL32102 - Saving Caller ID Entries

AT&T CRL32102
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Directory
The telephone system has 9 speed dial locations (2-9, 0), and a voicemail
access location 1, where you can store the telephone numbers you wish
to dial more quickly. You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing directory entries. The
voicemail access number must be manually entered. In the directory, speed dial
locations are indicated by their number on the bottom left side of the screen.
Assign a speed dial number
1. When the telephone is idle, press MENU
/SELECT.
2. Press q
CID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press q
CID or pDIR to scroll to >Speed dial. Press
MENU/SELECT.
4. Press q
CID or pDIR to choose your desired speed dial
location, or press the dialing key (2-9, 0) corresponding
to the location you wish to assign, then press
MENU/SELECT. The screen briefly shows Copy from
Directory... and then enters your directory list.
5. Press q
CID or pDIR to scroll to the phone number you
wish to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to
the previous menu. There is a confirmation tone.
Replacing a speed dial entry
1. When the telephone is idle, press MENU/
SELECT.
2. Press q
CID or pDIR to scroll to >Directory. Press
MENU/SELECT.
3. Press q
CID or pDIR to scroll to >Speed dial. Press
MENU/SELECT.
4. Press q
CID or pDIR to choose the location you wish to
reassign, or press the dialing key (2-9, 0) corresponding
to the location you wish to reassign, then press
MENU/SELECT to show the directory entry.
5. Press
MENU/SELECT again.
6. Scroll to >Change SD and then press MENU/
SELECT. The
screen briefly shows Copy from Directory..., then enters
your directory list.
7. Press q
CID or pDIR to scroll to the phone number you wish to reassign to
the selected speed dial location.
8. Press
MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
Speed dial
Add contact
>Speed dial
>2: <Unassigned>
3: Robert Brown
Copy from
Directory...
Robert Brown
888-883-2445
2

Table of Contents

Other manuals for AT&T CRL32102

Related product manuals