AT&T CRL32102 - Equalizer; Audio Assist

24
Telephone operation
Handset operation
Equalizer
The handset equalizer enables you to change the quality
of the audio to best suit your hearing.
While on an outside call or intercom call, or listening to
a message or announcement, press EQ
to select the
equalizer setting Treble 1, Treble 2, Bass or Natural
(the default setting). The current setting is shown on the
handset screen for two seconds.
NOTES:
If you switch the call between the handset and the speakerphone by pressing
/
SPEA�ER, the audio setting remains unchanged.
The current equalizer setting remains unchanged until a new setting is selected.
Audio Assist
Use the Audio Assist feature to enhance the clarity and loudness of your
caller’s voice on the handset earpiece or when you are listening to a
message or an announcement.
To turn on this feature:
While you are on a call or listening to a message or an
announcement using the handset earpiece, press
AUDIO ASSIST
. The screen shows Audio assist on. The
icon appears until you turn off this feature.
You must press AUDIO ASSIST
every time you
want to activate the feature.
To turn off this feature:
Press AUDIO ASSIST
. The screen shows Audio assist off.
-OR-
Audio Assist
ends when you switch from the handset earpiece (normal
handset use) to the speakerphone.
NOTE: Audio Assist ends when you end the call. If you end a call when the Audio Assist
feature is on, the handset earpiece listening volume automatically resets to level 1 (the
minimum setting) for the next call.
•
•
•
•
•
Bass
10/20
10:30
PM
Audio Assist is a registered trademark of Advanced American Telephones.
AUDIO
ASSIST